Beckman Access II - A Reliable Benchtop Immunoassay AnalyzerFebruary 21st, 2018
Siemens Healthineers awarded FDA Clearance for Point-of-Care TestsFebruary 19th, 2018
AACC Annual Scientific Meeting and Clinical Lab Expo
Medlab - The World’s Largest Expo
DubaiBooth No.: Z5 G 42
MEDICA 2017 - World Forum for Medicine
Düsseldorf, GermanyBooth No.: 3/D35-2
69th AACC Annual Meeting and Clinical Lab Expo - July 30 - August 3, 2017
SAN DIEGO, CA, USA
Thanks to Block Scientific, I was able to procure the re-certified Bayer DCA 2000+ without hassles and get the lab back in operation. The
device works perfectly and I look forward to doing more business with Block Scientific.
--- Mathew Anderson, New Jersey
Apolipoprotein B Test kit (liquid stable), R1: 4 x 70 ml R2: 2 x 50 ml
The assay has a linear range of 3.6 – 240.0 mg/dL with good correlation with existing FDA approved product with r2 values >0.99. The Diazyme Apo B Assay is not interfered by the following substances at the indicated concentrations: triglycerides at 1000 mg/dL, ascorbic acid at 10 mM, bilirubin at 40 mg/dL, bilirubin conjugate at 40 mg/dL, and hemoglobin at 1000 mg/dL. The reagent is stable for 18 months from date of manufacture when stored @ 2°- 8°C.
This method is based on the reaction of a sample containing human Apo B and a specific antiserum to form an insoluble complex which can be measured turbidimetrically at 340 nm. By constructing a standard curve from the absorbance of standards the concentration of Apo B in the samples can be determined.
The Diazyme Apolipoprotein B Assay is intended for the quantitative in vitro determination of apolipoprotein B (Apo B) in serum. It can be used as an aid for assessing the risk of coronary artery disease. For in vitro diagnostic use.