FDA Approves Tests from Siemens, Becton Dickinson, and Roche in FebruaryMarch 15th, 2018
Roche Diagnostics Named One of the 2018 “Top 70 Companies for Executive Women”March 14th, 2018
AACC Annual Scientific Meeting and Clinical Lab Expo
ChicagoBooth No.: 3849
Medlab - The World’s Largest Expo
DubaiBooth No.: Z5 G 42
MEDICA 2017 - World Forum for Medicine
Düsseldorf, GermanyBooth No.: 3/D35-2
69th AACC Annual Meeting and Clinical Lab Expo - July 30 - August 3, 2017
SAN DIEGO, CA, USA
Thanks to Block Scientific, I was able to procure the re-certified Bayer DCA 2000+ without hassles and get the lab back in operation. The
device works perfectly and I look forward to doing more business with Block Scientific.
--- Mathew Anderson, New Jersey
The ToxCup® Drug Screen Cup is an in vitro screening test for the rapid detection of multiple drugs in human urine at or above
the following cutoff concentration:
These tests provide visual qualitative results and are intended for in vitro diagnostic use only. The ToxCup® Drug Screen Cup is
available in double drug analyte dip format. It is intended for prescription point-of-care use.
These tests provide only a preliminary test result and are the first step in a two-step process for detecting drugs of abuse in
urine. The second step is confirming the results in a certified laboratory. For a quantitative result or to confirm preliminary
positive results obtained by the ToxCup® Drug Screen Cup, a more specific alternative method such as Gas
Chromatography/Mass Spectrometry (GC/MS) must be used. Clinical consideration and professional judgment must be applied
to any drug of abuse test result, particularly when a preliminary positive result is indicated.
Each strip contains two drug tests. C region shows validity of a test result. T1 region shows result for Test 1. T2 region shows result for Test 2.
For C region: The appearance of a line indicates a valid result. No line means an Invalid result. If a test strip does not have a line in the C region, test results are Invalid for both T1 and T2 on that strip.
For T1 and T2 regions: The appearance of a line indicates a Negative result. Note: Any test line, even a very faint test line, is considered a negative result.
No line indicates a
Preliminary Positive result. Note: Any urine with preliminary positive results should be sent to a laboratory for confirmation.