Block Scientific, Inc

Slide Prep Plus Centrifuge

A completely new, affordable cytology centrifuge.

Full size power and full size features in a small-size package.

The SlidePrep Plus is perfect for use in cytology, microbiology, hematology/oncology, virology, veterinary laboratories, research/general laboratories, and FISH testing.

Features
• Removable, sealed rotor
• Processes up to 6 specimens at one time
• Digital controls with LCD display
  o Stores up to 25 programs for instant recall
  o Displays the programmed speeds from 250 – 2400 rpm
  o Displays the programmed and remaining run time from 1-99 minutes
  o Three acceleration options allow the operator excellent flexibility and exceptional protection for fragile samples
• Audible alarms
  o Signals the SlidePrep Plus is out of balance
  o Alarm reminds users at one-minute intervals to remove specimens to protect them from air-drying and ensure consistent results
• Safety
  o Load and unload the sealed head in a biological safety cabinet
  o Operates only when the lid is locked into position
  o Auto-locking, plastic outer lid
  o Lid remains locked at all times during rotation
  o Sealed head is autoclavable
• Accepts Shandon or equivalent concentrating funnels


Product Specifications

Recommended use: Produce a monolayer of cells onto a glass slide from any fluid suspension
Slide holder: Sealed head
Maximum slide holder Capacity: Six filled Cytofunnels
Motor: Brushless
On/Off switch: Located at the rear of the instrument
Power cord: Grounded cord with 3-prong NEMA 5-15p plug
Dimensions (WxLxH): 10 Inch x 15 Inch x 10 Inch
Bench area requirements (WxLxH): 15 Inch x 18 Inch x 20 Inch
Weight: 10 lb.
Operating Noise Level: Less than 65 db
Temperature Range: Operating 10°C (50°F) to 40°C (104°F), Storage -10°C (14°F) to 60°C (140°F)
Conditions: For indoor use only. Maximum relative humidity 95% non-condensing

Electrical supply voltage:
120V 60Hz ± 10% 150W
120V Fuse, 1.25 amp (5 x 20mm) Type 218 Slo Blo
230V 50Hz ± 10% 150W
230V Fuse, .63 amp (5 x 20mm) Type 218 Slo Blo

Approvals:
ETL/CETL Listing for North America:
UL 61010-1
CAN/CSAC22.2#61010-1
IEC 61010-1
CENELEC EN 61010-1
IEC 61010-2-020
CE Authorized Representative Emergo
Conforms to Canadian Medical Device Regulations (MDR).