Model 755V - 12 Place Centrifuge

The Model 755V adds a precise variable control to the model 755. The patented Horizontal rotor will spin up to twenty-four (24) 10ml (16mmx100mm) tubes or six (6) 50ml tubes. Includes a "0" RPM safety lid lock. The Model 755 also includes a mechanical cycle counter. UL/CSA compliant.

The Horizon Model 755 is a continuous-duty, electronically-controlled, variable-speed, laboratory centrifuge with a lid safety interlock system. The unit is controlled by an electronic push-button timer that is variable from 1 to 30 minutes, for precise spin times and ease of use. Samples can be safely viewed through the transparent lid. Entry into the machine is restricted during operation by the safety interlock system. The Horizon features a lighted control panel that displays the status of the machine, easily viewable from a distance. Finally, a cycle counter keeps a count of the total number of machine runs for servicing and maintenance records.

Indicator lights:
‘RUN’ green -lights when power is applied to the motor
‘LATCH’ yellow -lights when the lid is closed and latched
‘UNLOCKED’ red -lights when the lock system is deactivated

Specifications

Speed Range (Model 755V):
755V w/12-Place Horizontal Rotor: 500 to 3,550 (+/- 100) RPM*
755V w/Fixed-Angle Rotors: 500 to 4,000 (+/- 100) RPM*

Maximum capacity:
12-Place Horizontal Rotor: 180 mL (12 x 15 mL)**

Overall Dimensions (H x W x D): 9 in. x 14.5 in. x 17 in.
Centrifuge Motor: 1/2 H.P. Brushless DC
Nominal Acceleration Time: 30 seconds
Nominal Braking Time: 15 seconds
Protection Breaker: 4 Amp. re-settable
Timer (electronic): 1 to 30 min +/- 1%
Voltage Requirement: 115 Volts (standard) -- 220/230 Volts (optional)
Power Requirement: 200 Watts
Frequency: 50/60 Hz
Weight: 39 lbs.

* Maximum speed shown is for the given rotor with 100mm red tube holders.
The use of other tube holders will alter the maximum speed.
** Maximum sample density is 1.15 grams / mL, (water density = 1.00 grams / mL)